How does the Water Tank Wire Drawing Machine Work?

How does the water tank type wire drawing machine, which is popular in the market, operate? How to operate the wire drawing machine to ensure the safety of the staff? What are the characteristics of the water tank wire-drawing machine?

l How to operate water tank wire-drawing machine?

l What are the characteristics of the water tank wire-drawing machine?

l How does the water tank wire drawing machine work?

How to operate water tank wire-drawing machine?

1. In the process of drawing, attention should be paid to master the temperature, strength and color of drawing to ensure the quality of drawing. We should also pay attention to observe the running state of the backward drawing machine equipment. Once found abnormal situation, should immediately stop inspection. In the process of drawing, if there is tension difficulty, easy to break, etc., also need to stop, check in time, solve the problem before operation.

2. water tank wire-drawing machine in the use of the process, should be according to the requirements of regular maintenance of equipment, to ensure the smooth operation of equipment, prolong the service life. Before the drawing operation, we also need to be very familiar with and understand the type and model of drawing, not blindly drawing.

What are the characteristics of the water tank wire-drawing machine?

1. The device only needs a motor to drive it. Due to the different specifications of drawing die used in the drawing process of water tank type wire drawing machine, we also need to adjust the drawing speed of each drawing head appropriately. In practice, we need to follow certain benchmark requirements to adjust the drawing rate.

2. Therefore, during the adjustment, it is necessary to ensure that the secondary flow of wire drawing machine equipment is stable at any time when passing through the drawing die, so it should meet the formula: πD 2v1=π D 2v2. In this formula, the letter D represents the line diameter of the incoming line, v1 represents the line speed of the incoming line, the letter D is the diameter of the line, and v2 refers to the line speed of the line.

3. In fact, the drawing speed of all different drawing heads of water tank type wire-drawing machine is adjusted according to this formula to ensure the normal operation of each drawing head. Because the drawing process is completed by machine shaft drawing, attention should be paid to ensuring the coordination and compatibility between the stages of the drawing system.

4. In the drawing process, we also need to consider the problem of heat dissipation. Because the water tank type wire drawing machine has a good cooling effect, it can ensure that the wire in the process of wire drawing meets the standard requirements.

How does the water tank wire drawing machine work?

1. For the water tank type wire drawing machine, because it is in operation, so the speed control is very high. The device usually requires the control system to provide very smooth linear speeds. In addition, cooling fluid is used to dissipate heat during drawing operations. The winding part of the device is mainly driven by a small power motor to ensure the smooth completion of the winding work.

2. It is important to remind everyone that if you need to close the bottle valve, do it slowly and carefully to avoid accidents. The loading and unloading of the assembled grid shall be carried out by two staff members. One operated electrical appliances, the other mounted the lifting bracket. Hoisting should be carried out as required to avoid collision and other problems. When transporting water tank type wire drawing machine equipment, rubber pads should be placed on the bottom of the car to avoid sliding.

3. In fact, friends who have used water tank type wire drawing machine equipment should know that, in order to ensure the quality of their work, we must ensure that the tension on the line when winding is constant. When winding, we can use two different methods, the tension is regulated by the tension roller, the tension is guaranteed by the weight of the tension roller itself. The second control method is to use torque control. At this time, the winding tension of the water tank type wire-drawing machine is usually determined by the given torque. If the process requirements are high, the first control method can be used.

As we know, compared with other similar equipment, the main difference is that it includes water tank structure. If you are looking for good quality water tank type wire drawing machine at a reasonable price, HANGZHOU CANDID I/E Co., Ltd is a wise choice.