 |
DL-2300
CANDID
| Quantity: | |
|---|---|
FINAL PRODUCT
Components and specifications
| No. | Qty. | Specification & description | Remark |
| Main Unit | |||
| Feeding | |||
| 1 set | Helix Loader& Hopper | ||
| Capacity: Continuous feeding | |||
| SINGLE SCREW EXTRUDER | |||
| 1 set | Single Screw Extruder diameterΦ150 L/D ratio 35:1 | ||
| Screw and barrel, origin Zhoushan,Zhejiang, China | |||
| Screw, 38CrMoAl, nitridation and polishing | |||
| Barrel: 38CrMoAL,nitridation treatment, water cooling in feeding parts | |||
| 1 set | Frequency converter | ||
| 1 set | Motor power 160kw | ||
| 1 set | ZLYJ375 Gear box,high torque, low noisy and hard gear face, with oil cooling system | ||
| 2 sets | Pressure sensors | ||
| 1 set | Melt pump 350CC 18.5KW | ||
| Each set in front and back of pump | |||
| 1 set | Screen changer | ||
| Hydraulic cylinder control, quick change ans easy operation. | |||
| 1 set | Flat head die (T Die) 2300mm | ||
With rack cavity and compounding die orifice to make film flat and it is easy to be adjusted. It can be adjusted in a large range and produce products of various thickness. Material:Stable alloy tool steel with the tempering treatment, less change in shape after heating, inner surface polished, hard chrome plating and abrading treatment. |
| Heating zone: Stainless steel heating tube; | |||
| Width adjustable by using deckles |
FINAL PRODUCT
Components and specifications
| No. | Qty. | Specification & description | Remark |
| Main Unit | |||
| Feeding | |||
| 1 set | Helix Loader& Hopper | ||
| Capacity: Continuous feeding | |||
| SINGLE SCREW EXTRUDER | |||
| 1 set | Single Screw Extruder diameterΦ150 L/D ratio 35:1 | ||
| Screw and barrel, origin Zhoushan,Zhejiang, China | |||
| Screw, 38CrMoAl, nitridation and polishing | |||
| Barrel: 38CrMoAL,nitridation treatment, water cooling in feeding parts | |||
| 1 set | Frequency converter | ||
| 1 set | Motor power 160kw | ||
| 1 set | ZLYJ375 Gear box,high torque, low noisy and hard gear face, with oil cooling system | ||
| 2 sets | Pressure sensors | ||
| 1 set | Melt pump 350CC 18.5KW | ||
| Each set in front and back of pump | |||
| 1 set | Screen changer | ||
| Hydraulic cylinder control, quick change ans easy operation. | |||
| 1 set | Flat head die (T Die) 2300mm | ||
With rack cavity and compounding die orifice to make film flat and it is easy to be adjusted. It can be adjusted in a large range and produce products of various thickness. Material:Stable alloy tool steel with the tempering treatment, less change in shape after heating, inner surface polished, hard chrome plating and abrading treatment. |
| Heating zone: Stainless steel heating tube; | |||
| Width adjustable by using deckles |