+86-13957112308    zmec@china-equipments.com
YOU ARE HERE: HOME » NEWS » Industry News » What is the Use of Automatic Wire Drawing Machine?

What is the Use of Automatic Wire Drawing Machine?

Views: 120     Author: Site Editor     Publish Time: 2022-07-21      Origin: Site

wire drawing machine is widely used in industrial applications of mechanical equipment, the use of Wire Nail Drawing Machine and what is the working principle? What are the special advantages of the automatic wire drawing machine?


l What is the use of wire drawing machine?

l What are the advantages of automatic wire drawing machine?

l How to use automatic wire drawing machine safely?


What is the use of wire drawing machine?

1. wire drawing machine belongs to the pre processing equipment for the production of standard parts and other metal products, the purpose is to put the production by the steel manufacturer to standard parts and other metal products production enterprise of wire or rod through the wire drawing machine drawing processing, make the diameter of wire or rod, roundness, internal metallurgical structure, surface finish and straightening degrees are required for standard parts and other metal products production raw material processing requirements. Therefore, the pretreatment quality of wire or bar by wire drawing machine is directly related to the quality of standard metal products manufacturing enterprises.

2. wire drawing machine according to its USES can be divided into metal wire drawing machine (for standard parts and other metal products production pre processing), plastic wire drawing machine (for plastic products industry in polyester, nylon, polyethylene, polypropylene, polyester chip, etc as raw material to produce various hollow, solid round wire or flat wire for deep processing of special equipment), bamboo drawing machine (used for bamboo and wood products industry in the production of chopsticks, Toothpicks, barbecue sticks and other special equipment for pulling out bamboo and wood for reprocessing), etc.


What are the advantages of automatic wire drawing machine?

1. Low frequency torque, stable output

2. High performance vector control

3. Good energy saving effect

4. High precision proportional linkage control

5. With slip compensation function, high speed accuracy


How to use automatic wire drawing machine safely?

1. Operators must wear gloves to prevent the workpiece from burning fingers and affecting product quality.

2. Install the wire drawing belt correctly (the direction of the arrow inside the wire drawing belt should be consistent with the direction of the arrow on the wire drawing roller). Carefully check the upper and lower bearing seat and lifting screw lubrication is good, ensure that no person on the front of the discharge before starting.

3. After the Wire Nail Drawing Machine is started, it shall immediately check whether the sand belt swing is within the required range and whether there are other abnormal phenomena. Otherwise, it shall immediately adjust or shut down.

4. It is forbidden to start the wire drawing machine and dust collecting fan at the same time, and it is forbidden to leave the operating personnel after starting the machine.

5. It is forbidden to put the workpiece directly on the conveyor belt without the pallet for wire drawing, and it is forbidden to release the work piece directly without the baffle bar for wire drawing, so as not to damage the conveyor belt and the workpiece fly out and hurt people.

6. When two people are working, the operator behind the equipment shall not be facing the exit of the drawing machine, so as to avoid the workpiece flying out of harm.

7. It is strictly forbidden to adjust air pressure under normal operation of the equipment, so as not to cause equipment and personal accidents due to the loss of sand belt.

8. If the device is abnormal during operation, shut down or power off immediately to avoid further failure.

9. The main power supply should be turned off during the maintenance of the equipment, and the license plate is strictly prohibited to operate, so as not to cause accidents.

10. To ensure device safety, turn off the main power supply and compressed air when the device is off-duty or waiting for a long time.


Wire Nail Drawing Machine is widely used in machinery manufacturing, hardware processing, petrochemical, plastic, bamboo and wood products, wire and cable industries. If you are looking for good quality automatic wire drawing machine at a reasonable price, HANGZHOU CANDID I/E Co., Ltd is a wise choice.


Leave a Message
GET IN TOUCH WITH US
A Full Line Machinery Service Center

HOME

CANDID has an experienced design, marketing and after-sales service team

Products

Contact

+86-13957112308
 +86-571-87031097
  zmec@china-equipments.com
  RM.1405, NO.346 Qingtai Street Hangzhou

Subscribe

Copyright © 2021 Hangzhou Candid I/e Co., Ltd  All rights reserved. Sitemap  Support by Leadong.