  +86 13588000917               zmec@china-equipments.com 
You are here: Home » Information » Blog » What are the processing quality factors of the wire drawing die that cause the rapid wear of the die?

What are the processing quality factors of the wire drawing die that cause the rapid wear of the die?

Views:3     Author:Site Editor     Publish Time: 2020-05-19      Origin:Site

What are the processing quality factors of the wire drawing die that cause the rapid wear of the die?
modelwire drawing machine

1. The drawing die blank and the mold steel sleeve are asymmetrically inlaid, and the inlaid carbide steel sleeve is unevenly distributed and has gaps, which are likely to cause U-shaped cracks in the drawing process of the wire.

2. In the process of laser drilling, the sintering marks are not cleaned or the force is not uniform, which will cause the dents of the diamond during the drawing process.

3. The mold hole design is unreasonable, the opening of the inlet lubrication area is too small, and the sizing belt is too long, which will lead to poor lubrication during the drawing process, resulting in accelerated mold wear and even chipping.

CONTACT US

Add : RM.1103, NO.346 Qingtai Street Hangzhou
Phone : 86-571-87924031
               86 -13588000917
E-mail : zmec@china-equipments.com
Fax : 86-571-87031097

Case

Quick Links

Get in touch

   RM.1103, NO.346 Qingtai Street Hangzhou
    86-571-87924031/86 -13588000917
    86-571-87031097
    zmec@china-equipments.com

 Copyright © 2019 Hangzhou Candid I/E Co., Ltd.