Views:3 Author:Site Editor Publish Time: 2020-06-03 Origin:Site
Reasons for frequent tempering of flat wire drawing machine
The abrasive belt of the plane wire drawing machine is pressed by the cylinder to contact the workpiece. The pressure can be adjusted according to the surface roughness and grinding amount of the workpiece. When the flat wire drawing machine is processed, it often encounters the tempering situation. What is the reason?
Plane wire drawing machine is often tempered for many reasons, probably summarized as follows:
1. Airway leakage;
2. Failure of the tempering device;
3. Replace the head of the fire protection device;
4. Use water to cool the material and speed it up;
5. The flame temperature and the material do not match;
6. Too many material impurities;
7. Replace the air duct.The blistering fire of the polished organic crafts is yellowish.