 |
Net Feeding and Straightening Machine
Description:
It is an accessory machine used to straightening the gabion net to make it flat before cutting in gabion production line, pls kindly check machine details as follow:
| Item | Specification |
Max. working width | 4m |
Wire diameter | ≤5mm |
Upper roll size | Φ133mm*3pcs |
Down roll size | Φ133mm*4pcs |
Straightening thickness | ≤2.8mm |
Output | 8.5m/minute |
Power | 6.5KW |
Roller speed | 20turn/minute |
Weight | 2.5T |
Size (L×W×H) | 4550×1450×1400 (mm) |
Infrared ray meter counter | |
Wire stop device when the cutting machine cut the net | |
| Frequency motor | |
Installation
1. Measure 2.5m at the front of the net winding machine where to put the net straightening machine. Pls make sure that it is parallel with net winding machine.
2. Pls connect the cable according to the electrical schematic diagram we provided. The power cable required is 6mm2, 4 core.
3. Pls fixed the machine with 4 pcs Φ12 anchor bolts later after machine running smoothly.
Commissioning
1. Feeding lubricating oil before starting machine.
2. Starting test running the machine around 10 mins without feeding net till it runssmoothly.
3. Pls feed the net to net pressing roller and insert it into the traction gear on traction rolle. Power on and choose “Jog Forward” on manual screen to make the net move under the cutting blade.
4. Input the required cutting length in touch screen and choose “Manual Cut” on manual screen to cut one pc net and to check if the net cutting position is correct or not. Pls adjust the cutting length if the position is not correct
5. Pls start the net straightening machine and nut cutting machine in auto mode if everything is correct.
Net Feeding and Straightening Machine
Description:
It is an accessory machine used to straightening the gabion net to make it flat before cutting in gabion production line, pls kindly check machine details as follow:
| Item | Specification |
Max. working width | 4m |
Wire diameter | ≤5mm |
Upper roll size | Φ133mm*3pcs |
Down roll size | Φ133mm*4pcs |
Straightening thickness | ≤2.8mm |
Output | 8.5m/minute |
Power | 6.5KW |
Roller speed | 20turn/minute |
Weight | 2.5T |
Size (L×W×H) | 4550×1450×1400 (mm) |
Infrared ray meter counter | |
Wire stop device when the cutting machine cut the net | |
| Frequency motor | |
Installation
1. Measure 2.5m at the front of the net winding machine where to put the net straightening machine. Pls make sure that it is parallel with net winding machine.
2. Pls connect the cable according to the electrical schematic diagram we provided. The power cable required is 6mm2, 4 core.
3. Pls fixed the machine with 4 pcs Φ12 anchor bolts later after machine running smoothly.
Commissioning
1. Feeding lubricating oil before starting machine.
2. Starting test running the machine around 10 mins without feeding net till it runssmoothly.
3. Pls feed the net to net pressing roller and insert it into the traction gear on traction rolle. Power on and choose “Jog Forward” on manual screen to make the net move under the cutting blade.
4. Input the required cutting length in touch screen and choose “Manual Cut” on manual screen to cut one pc net and to check if the net cutting position is correct or not. Pls adjust the cutting length if the position is not correct
5. Pls start the net straightening machine and nut cutting machine in auto mode if everything is correct.
