Views:1 Author:Site Editor Publish Time: 2020-06-02 Origin:Site
Is the quality of the automatic drawing machine good? Look at the four key points
With the increasing demand for automatic wire drawing machines, the number of manufacturers producing automatic wire drawing machines is also increasing, especially in Guangzhou, Fujian, Dongying and Qingdao in southern China. Many brands, which one is better when choosing? How to determine the quality of automatic drawing machine?
First of all, we have to look at the use of the problem: the design of the machine's size and structure is critical, and a better structure and a reasonable and scientific size are the keys to polishing efficiency.
The second is to see the vibration problem when using the automatic wire drawing machine: some machines vibrate too much, and they will "run around" if they are not fixed! The main reason is that the balance of the rotating wheel is not good! Large, resulting in relative motion between parts and vibration. Furthermore, the motor is not fixed well, and it also generates vibration.
Then there is the problem of noise during use: some factories have poor processing equipment and are very backward, and with poor quality awareness, the manufactured parts are bad, the gap between the matching parts is too large, and the speed of the emery cloth belt is too fast. Electricity and other problems can cause noise Big!
Finally, there is the problem of the life of the automatic wire drawing machine: some brands of automatic wire drawing machines break down in a short time, mainly due to the lack of heat treatment, the use of gray cast iron, poor lubrication, and low or high hardness. !
The above is the quality of the automatic wire drawing machine by the plane wire drawing machine manufacturer? Look at the detailed introduction of the four key points, I hope to help you