  +86 13588000917               zmec@china-equipments.com 
You are here: Home » Blog » Blog » Correct operation of water tank drawing machine

Correct operation of water tank drawing machine

Views:6     Author:Site Editor     Publish Time: 2020-05-26      Origin:Site

Correct operation of water tank drawing machine

The water tank wire drawing machine is that the steel wire produces relative sliding between the drum and the drum in different degrees during the drawing process, and the steel wire, drum, and drawing die are immersed in the cooling lubricant or sprayed by it during the work, so it is called It is a water tank wire drawing machine.
Correct operation of water tank drawing machine

The structure of the water tank wire drawing machine is very compact and covers a small area. The drawing density of the whole equipment is high, and its wire will not twist during the drawing process, so that high-speed drawing can be carried out because of the horn The process is carried out in the cooling lubricant, the cooling and lubrication conditions of the steel wire are very good, and the quality is guaranteed.

Correct operation of water tank drawing machine
The water tank wire drawing machine must fill the water tank with water when it is working, then dip the soap, pour it into the water tank, arrange the wire drawing mold, place the raw materials on the wire rack, then roll the tip through the mold to open the host, and pull out the mold 2 meters, put the mold on the grate, wrap the wire clockwise around the tower wheel twice and then wear the second mold, on this basis, pull out the wire you need, after wearing a mold, wind it through the water baffle On the take-up tank, start the take-up tank.

In order to ensure the stability of its water tank-type wire drawing machine, we need to control it flexibly, so as to achieve the purpose of coordinated work. During the operation of its water tank-type wire drawing machine, it also needs to use a cooling liquid to dissipate heat to prevent The quality of brushed products is adversely affected. In addition, when winding the wire, we need to use a small power motor to drag, which can ensure the constant tension of the wire during winding.

During the debugging process of the water tank wire drawing machine, the problems involved in starting, stopping or disconnection detection should be completed by the PLC. During commissioning, the start signal of the main drawing and winding of the water tank wire drawing machine is kept in parallel, so it will start at the same time.

Before starting the water tank drawing machine, you should carefully check whether the fasteners on the equipment are well tightened and whether the transmission components can rotate flexibly. In addition, you should also check whether the lubricating oil circuit, cooling pipeline and pneumatic pipeline are smooth, whether there is leakage, and whether the electrical wiring is normal. After confirmation, the tank-type wire drawing machine can be started.

CONTACT US

Add : RM.1103, NO.346 Qingtai Street Hangzhou
Phone : 86-571-87924031
               86 -13588000917
E-mail : zmec@china-equipments.com
Fax : 86-571-87031097

Case

Quick Links

Get in touch

   RM.1103, NO.346 Qingtai Street Hangzhou
    86-571-87924031/86 -13588000917
    86-571-87031097
    zmec@china-equipments.com

 Copyright © 2019 Hangzhou Candid I/E Co., Ltd.